5.0(72 REVIEWS)
  • Mon: 7:30 am-5:30 pm
  • Tue: 7:30 am-5:30 pm
  • Wed: 7:30 am-5:30 pm
  • Thu: 7:30 am-5:30 pm
  • Fri: 7:30 am-5:30 pm
  • Sat: Closed
  • Sun: Closed
620 Glenna Dr San Angelo, TX 76901
Schedule Appointment
(325) 227-6701

GMC

Home » GMC

  • 2015 GMC Acadia

    GMC Acadia
    Mileage
    155,624
    Service Date
    4/24/2025
    Services Performed
    • Scanned vehicle and found code P0496- incorrect purge flow. Checked purge solenoid stuck open can blow through it when normally should be closed. Will need a purge solenoid. Recommend replacing the front and rear brake pads and rotors. Shocks are worn
    • Oil and Filter changed
    • CHECK BRAKE
    • Replaced both front brake pads and rotors.
    • Replaced both rear brake pads and rotors
    • Replaced the purge solenoid.
    • BG INDUCTION SERVICE
    • Replaced both front strut assemblies and installed camber bolts
    • Replaced both rear shocks
    • ALIGNMENT
    • Replaced the front engine mount
    • Replaced the torque mount
     
    NATASHA M. gave our service a 5 star review on 4/24/2025

  • 2017 GMC Sierra 1500

    GMC Sierra 1500
    Mileage
    107,133
    Service Date
    4/2/2025
    Services Performed
    • Resealed the front timing cover.
    • Evacuated and recharged the a/c system.
    • Dropped the transmission oil pan to replace the pan gasket and filter and top off fluid. (customer provided)
    • Removed the transmission to replace the rear main seal.
     
    ALLEN W. gave our service a 5 star review on 4/2/2025

  • 2005 GMC Sierra

    GMC Sierra
    Mileage
    200,689
    Service Date
    3/11/2025
    Services Performed
    • Traced and found the shift lever control arm broken. Vehicle has various leaks coming from the water pump, lower radiator hose, master cylinder, Vehicle will also need rear brake drums, parking brake shoes and both rear wheel cylinders.
    • Replaced the shifter lever control arm.
    • Oil & filter changed.
     
    JOSHUA L. gave our service a 5 star review on 3/12/2025

  • 2014 GMC Sierra 1500

    GMC Sierra 1500
    Mileage
    87,161
    Service Date
    2/19/2025
    Services Performed
    • Customer believe vehicle needs a oil pump
    • Dropped the oil pan and timing cover and replaced the engine oil pump, oil pump solenoid wiring harness, various gaskets and resealed the engine oil pan. Filled vehicle with engine oil. Installed a new oil filter and new coolant.
    • FUEL
     
    ARMANDO G. gave our service a 5 star review on 2/19/2025

  • 2021 GMC Sierra 1500

    GMC Sierra 1500
    Mileage
    45,826
    Service Date
    12/26/2024
    Services Performed
    • Scanned found Codes P0101, P0103,P0171 and P0174 All Codes pertained to Mass Airflow or circuit. Checked wires and circuit all ok, Scanner data showed low frequency. Removed MassAirflow to check and found facing wrong way not reading air intake. Removed and installed correctly, reset light with scanner road tested system ok.
     
    EDDIE R. gave our service a 5 star review on 12/26/2024

  • 2005 GMC Sierra

    GMC Sierra
    Mileage
    195,231
    Service Date
    9/4/2024
    Services Performed
    • CHECK FRONT SUSPENSION
    • Replaced both upper control arms.
    • Replaced both lower ball joints.
    • Replaced the inner and outer tie rod end on the right front.
    • ALIGNMENT
     
    JOSHUA L. gave our service a 5 star review on 9/6/2024